Resistance Boxes

The structural integrity of Resistance Box is coupled with nickel chromium alloy steel that fights against corrosion. Stainless steel structure assures that the grid strength and structural integrity are at its optimum limit. The resistors work on a broad range of current and are apt for high wattage. They are compact and light weight. We check each product for its best performance.

Features:

• Uniform dissipation of electricity through stainless steel makes the flow consistent
• Identical size and mounting dimension of the grids
• Tig welding reduces the undue stress on insulators and rods

The structural integrity of Dynamic Braking Resistor comes from the stainless steel structure. The grids get an enhanced strength with the presence of this high-strength alloy. It is a high wattage resistor that is apt for electric motors when it comes to dynamic braking. It disburses the electricity in a uniform pattern to reduce the shock on disconnection. We deploy the best quality rust free alloy for long life.

Features:

• Hardened stainless steel structure for a long life
• Provides resistance in case of high power and wattage
• Sophisticated design for efficient operation

The strength of Stainless Steel Punch Grid Resistors is coupled with nickel chromium alloy steel that fights against corrosion. Stainless steel structure assures that the grid strength and structural integrity are at its optimum limit. The resistors work on a broad range of current range from 12 ampere to 234 ampere. They are compact and light weight. We check each product for its best performance.

Features:

• Uniform dissipation of electricity through stainless steel makes the flow consistent
• Identical size and mounting dimension of the grids
• Tig welding reduces the undue stress on insulators and rods

Other Details:

• "Omega Controls" punched gird resistors consist of grids punched from corrosion resisting Nickel Chromium Alloy Sheets steels. The inherent strength of the steel itself is very high and owing to the pressed and reinforced construction the rigidity of the grid is even higher. Punched steel grids are completely immune to shock and vibration. They function reliably under the worst operating conditions and are particularly suited for steel mill duty. They are comparatively light in weight for a given rating and are compact also
• These resistors are available in a wide range of current ratings from 12 Amps to 234 Amps continuous and the fixing dimensions and weight of various type of grids are identical, which means that different type of grids required for various steps of resistance would have identical size and mounting dimensions
• The heat dissipation of punched steel grids is uniform irrespective of the current rating. Therefore the terminal loading of the Resistance Box having various types of punched grids is uniform
• The series connection between adjacent grids is not through pressure contact via tie rod nuts but by means of tig welding. This completely eliminates any stress on the tie rod and Insulators which might result in damage during cycles of heating and cooling.
• When subjected to severe unforeseen overloads of moderate duration these grids may become red hot but undergo no damage whatsoever and retain their shape after over load disappears.

The strength of Punched Stainless Steel Grid Resistor is coupled with nickel chromium alloy steel that fights against corrosion. Stainless steel structure assures that the grid strength and structural integrity are at its optimum limit. The resistors work on a broad range of current range from 12 ampere to 234 ampere. They are compact and light weight. We check each product for its best performance.

Features:

• Uniform dissipation of electricity through stainless steel makes the flow consistent
• Identical size and mounting dimension of the grids
• Tig welding reduces the undue stress on insulators and rods

Other Details:

• "Omega Controls" punched gird resistors consist of grids punched from corrosion resisting Nickel Chromium Alloy Sheets steels. The inherent strength of the steel itself is very high and owing to the pressed and reinforced construction the rigidity of the grid is even higher. Punched steel grids are completely immune to shock and vibration. They function reliably under the worst operating conditions and are particularly suited for steel mill duty. They are comparatively light in weight for a given rating and are compact also
• These resistors are available in a wide range of current ratings from 12 Amps to 234 Amps continuous and the fixing dimensions and weight of various type of grids are identical, which means that different type of grids required for various steps of resistance would have identical size and mounting dimensions
• The heat dissipation of punched steel grids is uniform irrespective of the current rating. Therefore the terminal loading of the Resistance Box having various types of punched grids is uniform
• The series connection between adjacent grids is not through pressure contact via tie rod nuts but by means of tig welding. This completely eliminates any stress on the tie rod and Insulators which might result in damage during cycles of heating and cooling.
• When subjected to severe unforeseen overloads of moderate duration these grids may become red hot but undergo no damage whatsoever and retain their shape after over load disappears.